Nov 21, 2007
なんかきたー [computer]
NetBSD loader module loaded
kernel=/boot/netbsd.bin
load address=0x00090000
boot device=0x00000000
boot flags=0x00000000
cmdline=bootdev=sd0a
flushing ide devices: hda
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 3.1_RC4 (GENERIC.KUROBOX) #0: Sat Oct 14 19:15:38 JST 2006
root@KUROBOX:/usr/src/sys/arch/sandpoint/compile/GENERIC.KUROBOX
total memory = 128 MB
avail memory = 120 MB
mainbus0 (root)
cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
cpu0: HID0 90c000
cpu0: 260.14MHz
eumb0 at mainbus0
ociic0 at eumb0 addr 0xfc003000 irq 5: On-Chip I2C controller
iic0 at ociic0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
com0 at eumb0 addr 0xfc004600 irq 14: ns16550a, working fifo
com0: console
com1 at eumb0 addr 0xfc004500 irq 13: ns16550a, working fifo
pci0 at mainbus0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1057 product 0x0006 (rev. 0x14)
re0 at pci0 dev 11 function 0: RealTek 8169S Single-chip Gigabit Ethernet
re0: interrupting at irq 0
re0: Ethernet address 00:0d:0b:ad:b4:80
rgephy0 at re0 phy 7: RTL8169S/8110S 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
中略
Updating motd.
Starting kuro_avrd.
Starting inetd.
Starting cron.
Tue Nov 20 16:10:53 UTC 2007
NetBSD/sandpoint (MYBOX) (console)
login:
NetBSD loader module loaded kernel=/boot/netbsd.bin load address=0x00090000 boot device=0x00000000 boot flags=0x00000000 cmdline=bootdev=sd0a flushing ide devices: hda Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 3.1_RC4 (GENERIC.KUROBOX) #0: Sat Oct 14 19:15:38 JST 2006 root@KUROBOX:/usr/src/sys/arch/sandpoint/compile/GENERIC.KUROBOX total memory = 128 MB avail memory = 120 MB mainbus0 (root) cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary) cpu0: HID0 90c000中略cpu0: 260.14MHz eumb0 at mainbus0 ociic0 at eumb0 addr 0xfc003000 irq 5: On-Chip I2C controller iic0 at ociic0: I2C bus rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock com0 at eumb0 addr 0xfc004600 irq 14: ns16550a, working fifo com0: console com1 at eumb0 addr 0xfc004500 irq 13: ns16550a, working fifo pci0 at mainbus0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x1057 product 0x0006 (rev. 0x14) re0 at pci0 dev 11 function 0: RealTek 8169S Single-chip Gigabit Ethernet re0: interrupting at irq 0 re0: Ethernet address 00:0d:0b:ad:b4:80 rgephy0 at re0 phy 7: RTL8169S/8110S 1000BASE-T media interface, rev. 0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Updating motd. Starting kuro_avrd. Starting inetd. Starting cron. Tue Nov 20 16:10:53 UTC 2007 NetBSD/sandpoint (MYBOX) (console) login:
blosxom 2.0
and
modified by
blosxom starter kit